- LED Light Fixtures
- Outdoor Architectural
- 115W, WiLLstudio DRX Architectural Area LED Light Fixture, 18000 Lumens
- Designed, engineered, and manufactured in Wisconsin, USA from premium domestic and imported components
- PPG® Commercial Performance Coatings custom color matching of RAL codes and architectural colors
- IES files, photometric reports, and lighting simulations available from factory design team
- Proprietary heat sink design with low drive current resulting in reported L90 LED life over 100,000 hours
- Easy driver and LED module access for technology upgrades and maintenance
- Flexible mounting options with custom adapters available
- -40°C to +45°C ambient operating temperature
- Standard AC input of 120-277v VAC, up to 480v available
- Isolated 1-10V PWM/3-timer-modes dimmable (standard) and dim-to-off with standby power ? 0.5W (optional)
- Power factor: >0.9 min
- Total harmonic distortion of 20% max
- Drivers include integral input Surge Protection of Differential Mode 6kV, Common Mode 10kV per EN 61000-4-5
- Licensed electrician required for installation
- High-grade aluminum enclosure for superior corrosion resistance, strength, and thermal management
- Architectural grade powder coat enclosure and black anodized heat sink
- High-grade stainless steel hardware for superior strength and corrosion resistance
- Driver components are fully encased in potting material for moisture and vibration resistance
Energy Control Options
- Daylight harvesting and photo controls
- Motion control and dimming
- Surge protection
- CA Title 24 compliance options available upon request
Documents & Downloads
|L90 LED Hours||100,000+|
|Standard LED Temp||5000K|
- Considered the typical initial delivered lumens of the LED light engine. Specific lumens for an application will depend on things like fixture size and geometry, environmental characteristics and color temperature.
Industry grade, USA made light poles, brackets and assemblies are the core of our product offering. LPP's ever expanding catalog includes 20,000+ standard light pole offerings in aluminum, steel and fiberglass materials. LPP delivers nearly limitless procurement and production potential in various materials, shapes, sizes and finishes for parking lot, roadway, street and security applications.
“Light Poles Plus has employees that went to this high school, they have kids in our district, and it was really a no-brainer to work with them. For them to see what they have done for our community and our school is fantastic!”
Tom G. - Campbellsport, WI
“We've been very pleased working with LPP and the ideas that they had for us to solve our lighting problems. The time that they took to really investigate what improvements we needed to make. And the products that we could use to make these improvements.”
Karen K. - Eden, WI
“Everything went exceptionally well. I've been involved in a lot of different projects and by far this is the best experience I've had in my whole life.”
Steve P. - Appleton, WI
The Barber Steel Foundry in Rothbury, MI was in need of new LED lighting to illuminate the facility. The Foundry had specific requirements for their new LED lighting that LightPolesPlus needed to meet.
“The City of Adams would like to thank you. You guys just really did a phenomenal job. We were really impressed with all the materials that you gave us to be able to make a good decision and we do feel like we made the best.”
Roberta P. - City of Adams, WI
Creating a brighter front line was extremely important for the Antioch Dealership in Illinois. To create a more attractive, clean, and inviting front line for their buyers, they contacted Light Poles Plus for new LED Shoebox light fixtures and square straight steel light poles.
LPP light poles, brackets and arms are engineered according to AASHTO standards and accepted commercial criteria. Proper selection for an application is based on information such as EPA, wind zone, mounting height and other attachments (such as banner arms and flags). This information is necessary to ensure correct engineering. LPP and its vendors assume no responsibility for proper loading analysis and/or product selections. Design information (such as EPA charts and wind maps) found on our websites and selection guidance offered by LPP customer support representatives are provided as general guidelines only. The customer remains solely responsible for proper selection of the light pole, luminaire and/or related accessories that adhere to all applicable requirements, including (but not limited to) EPA design criteria, job specifications and engineering requirements. To ensure proper selection of the light pole, luminaire, accessories and/or foundation, LPP recommends the customer consult a qualified engineer to analyze the loading and design criteria for the specific application.What about light pole vibration?
Light pole vibration problems are caused by environmental factors that vary by geography. They do not result from improper materials and/or poor manufacturing processes. If you have concerns about light pole vibration for a specific project you are working on, please contact LPP customer support.
We recommend vibration dampeners be used when (1) light poles are being installed on a parking ramp, deck, bridge, pier, airport, train or subway hub/terminal or known problem area, (2) a load of 0.75 EPA or smaller is going on the light poles and (3) light poles are being used as camera supports and/or will have non-standard appendages attached to them. The LPP warranty excludes light pole failure caused by harmonic vibration.What about estimated production lead times?
Estimated manufacturing lead times are the best estimate based on current business conditions and may change due to factors including factory capacity and availability of component parts such as base castings, fabricated parts, electronic components and other factors.What are LPP's cancellation and return policies?
It’s our goal that all LPP customers are completely satisfied with their products. We take extra care during the quotation and order processing stages and work with our customers to verify that the ordered bill-of-material fits the application requirements. Very few of our orders are ever cancelled or returned, and that’s because we want your project to run as smoothly as you do.
With that said, we understand that there are unforeseen circumstances that may require order cancellations or returns.
Any order changes and/or cancellations prior to shipment must be requested (in writing) within 24 hours of the order being processed to avoid restocking fees. Order cancellations after 24 hours are subject to 50-90% restocking fees, depending on where the order is at in the production cycle.
For products that have shipped, no product may be returned without a completed Return Materials Authorization ("RMA") form that can be requested in writing at firstname.lastname@example.org. We will not accept any returned product without an RMA and no returned product will be accepted until it has been inspected and determined to meet the criteria stated below. At customer's written request and cost, products not accepted for return will be shipped back to customer. The return policy applies only to products purchased from LPP.
- Returns must be within 15 days of delivery date.
- Product must be returned, shipping prepaid, in original packaging and be in unaltered, like-new condition.
- The return must include all original components.
- Refunds for unaltered, like-new products will be processed in the ordinary course for processing payables and may take up to one month.
- A 50% restocking fee applies to all returned LED fixture, light pole and bracket products.
- In addition to the 50% restocking fee, the customer is responsible for original outbound freight charges.